| Frame Material | Custom butted, shaped, machined, heat treated steel. |
| Country of manufacture | Taiwan |
| Design / Tooling | 100% Designed and Engineered by Rodeo Labs |
| Tire clearance 650b | Max width: 2.4″ / 60mm with Spork 4. 2.2″ / 56mm with Spork 3 | Min. recommended width: 54mm | Varies by tire / rim / conditions |
| Tire clearance 700c | Max width: 2.4″ / 60mm with Spork 4. 2.2″ / 56mm with Spork 3 | Min. recommended width: 32mm | Varies by tire / rim / conditions |
| Frame weight | Weights are provisional based on prototype frames. Subject to small change. 2488g for 61cm. 2405g for 58cm. 2360g for 56cm. 2312g for 54cm. 2271g for 52cm. 2223g for 49cm. |
| Fork | Rodeo Spork 4.0 or Rodeo Spork 3.3 / Full carbon adventure fork |
| Fork weight | 480g Spork 4. 495g Spork 3. |
| Cable routing | Mechanical or electronic. Convertible or cappable modular endcaps. Full internal housing runs through downtube / BB / Stays – as desired. Build it how you like. |
| Dynamo routing | Internal, fork. Internal, frame. Spork 4 accepts routing from fork leg all the way through steer tube. Spork 4 accepts Son SL direct mounting system. |
| Brake Standard | Flat Mount. 160mm native frame. 180mm max rotor size on frame (with adapter). Spork 4 max 180mm rotor – 160mm native. Spork 3 max 160mm rotor – 140mm native. |
| Bottom Bracket | The Keg. T47 threaded, 85.5 mm width. Expanded center diameter for internal routing around spindle sleeve. |
| Seat Post | 27.2 mm post |
| Dropper post | Internal, cable routing through BB area via Bowtie pass through for easier routing. |
| Seat Clamp | 29.8mm (6066 aluminum clamp included) |
| Thru Axles | Rear – 12mm x 175mm total length // M12xP1.0x14.5mm threading Front Spork 4 – 12 x 120mm total length // M12xP1.5x14mm threading Front Spork 3 – 12 x 127mm total length // M12xP1.5x16mm threadingFront optionally convertible to 15mm. |
| Headset | 44mm head tube, 1-1/8″ to 1.5″ tapered steerer.Non-integrated routing installations: EC44/40 lower, ZS44/28.6 upper or use an EC44/40 upper for a 15mm stack increase.Integrated routing installations:Spork 4 supports fully integrated headset routing with standard ZS44 upper via D-shaped steer tube. Also supports standard non-headset routing. Spork 3 supports fully integrated headset routing with EC44 upper cup. For fully hidden installations, headset brand must match stem brand and have matching spacers. Spork 3 Also supports standard non-headset routing.Headset not included. |
| Chainring compatibility | 2x: max 50/34, min 36/24. 1x: max 48, and 50t is possible with a WIDE spec crankset. |
| Front derailleur mounting | 28.6mm band clamp. |
| Rear derailleur hanger | Aluminum, replaceable. UDH native slider allows for Sram Transmission drivetrain installations. Standard derailleur supported using the Sram UDH standard derailleur hanger (not included). |
| Fender mounts | Frame and fork. Max 65mm outer fender width at 700c. |
| Bottle cage mounts | 2 positions inside main triangle via 3 bosses per position. 1 on underside of down tube. 2 on fork, one per leg. Two top tube eyelets also support bottle or bag mounting. |
| Rack mounts | 1 on seat stay bridge. Lower seat stays 1 per side.Axle rack mounting possible via third party axle and rack systems. |
| Fork mounts | Three mid-leg eyelets per fork blade, spaced for a water bottle cage or three bolt cargo cage. (M5 x 0.8mm). Use 20mm bolts with washer for heavy loads. Two eyelets near axle per side (M5 x 0.8mm). Optional offset eyelet kit available. |
| Fork crown bolt | Not included. 75mm length typically needed for lights / racks. Not compatible with recessed brake nuts. Use nylon washers on each end of bolt to protect fork. |
| Fork cargo capacity | 27.6 lb / 12.5 kg total cargo weight, evenly distributed |
| Headset spacer max height | 40mm between headset and stem. For another 15mm of stack, use an EC44 upper cup. |
| Frameset rider weight limit | 280 lb / 127kg |
| Slider Rage | 30mm of chain stay length adjustability. |
| Certification | Flaanimal 6 Steel has passed the entire suite of ISO 4210 MTB Racing suite of tests. |
| Warranty | Warranted for life to the original owner against defects in design, materials, and workmanship. Frame is fully dipped in anti-rust coating prior to painting. We cannot guarantee that a steel frame is ever fully impervious to rust, but we do our best to protect it from the factory. Please read our complete warranty policies here. |
The Flaanimal 6.0 Manual can be found HERE
