| Frame Material | Toray T800 Carbon Fiber |
| Country of manufacture | China |
| Design / Tooling | 100% Designed and Engineered by Rodeo Labs |
| Tire clearance 650b | Max width: 2.4″ | Min. recommended width: 40mm | Varies by tire / rim / conditions |
| Tire clearance 700c | Max width: 55mm / 2.1″ | Min. recommended width: 28mm
Varies by tire / rim / conditions. Don’t get greedy. |
| Frame weight | 58cm 1190g raw. Other sizes approx. 50-100g lighter per size. Hardware – approx. 150g. Painted frames will be 100-250g heavier. |
| Fork | Rodeo Spork 3.3 / Full carbon adventure fork |
| Fork weight | Average 495g |
| Cable routing | Mechanical, Di2, eTap. Convertible or cappable modular endcaps. Full internal housing runs through downtube / BB / Stays |
| Dynamo routing | Internal fork. Front and rear light, USB stem cap, dynamo hub compatible. Top tube port. Seat stay ports. |
| Brake Standard | Flat Mount, 140mm/160mm front brake plate | 160mm flat mount native rear brake |
| Bottom Bracket | T47 threaded for inboard bearing, 85.5 mm width. |
| Seat Post | 31.6mm or 27.2mm. 27.2 shim supplied with each frame. |
| Dropper post | Internal, cable routing through BB area via pass through for easier routing. |
| Seat Clamp | TD4 clamp designed to integrate with frame shape. Simple clamp design, no internal wedge or proprietary clamp oddities. |
| Thru Axles | Rear – 12mm x 175mm total length // M12xP1.0x14.5mm threading
Front – 12 x 127mm total length // M12xP1.5x16mm threading Front optionally convertible to 15mm. |
| Headset | 52mm integrated frame cups. Rodeo semi-integrated headset included w stainless bearings. IS 52 | 40 upper, IS52 | 40 lower. Integrated stem / bar installations will typically use a matching headset. |
| Chainring compatibility | 2x: max 50/34, min 36/24.
1x: max 48, and larger is possible with a WIDE spec crankset. |
| Front derailleur mounting | Braze-on, removable derailleur hanger available upon request. |
| Rear derailleur hanger | Aluminum, replaceable
UDH native slider allows for SRAM Transmission drivetrain installations. Standard derailleur supported using the SRAM UDH standard derailleur hanger. |
| Di2 battery position | Downtube. Secured with hardware / ties. Accessed via downtube storage hatch. |
| Fender mounts | Frame and fork with Stay Dry kit. Max 65mm outer fender width at 700c. M5 bolts. |
| Bottle cage mounts | 2 positions inside main triangle via 3 bosses per position. 1 on underside of down tube. 2 on fork, one per leg. Two top tube eyelets also support bottle or bag mounting. |
| Rack mounts | 1 on seat stay bridge. Lower seat stays 1 per side. Tailfin mounting supported on frame eyelets or via through axle kit from Tailfin. Must use the optional Tailfin UDH adapter matched to your derailleur. |
| Fork mounts | Three mid-leg eyelets per fork blade, spaced for a water bottle cage or three bolt cargo cage. (M5 x 0.8mm). Use 25mm bolts with washer for heavy loads.
Two eyelets near axle per side (M5 x 0.8mm). Optional offset eyelet kit available. |
| Fork crown bolt | Not included. 75mm length typically needed for lights / racks.
Not compatible with recessed brake nuts. Use nylon washers on each end of bolt to protect fork. |
| Fork cargo capacity | 27.6 lb / 12.5 kg total cargo weight, evenly distributed |
| Headset spacer max height | 40mm between headset and stem |
| Frameset rider weight limit | 280 lb / 127kg |
| Slider Range | 425mm – 455mm |
| Certification | Traildonkey 4.2 has passed the entire suite of ISO 4210 MTB Racing suite of tests. |
| Warranty | Warranted for life to the original owner against defects in design, materials, and workmanship. Please read our complete warranty policies here. |
